Product namePS-500
Connected to the discharge waterway of an inverter pump, and applies electricity to the rotational speed control circuit
This sensor controls a pump's rotational speed to the keep discharge pressure consistent
This sensor controls a pump's rotational speed to the keep discharge pressure consistent
Basic Characteristics
| Product summary | Pressure sensor |
|---|---|
| Product purpose | Pressure control for inverter pumps |
| Intended use | Automatic water pumps for apartments and buildings, and compact pumps |
| Operating type | Its detector that uses semiconductor pressure sensors and its built-in electronic circuit convert pressure changes in fluid into voltage or current output signals. |
| Compatible standard | RoHS compliant |
Mechanical Characteristics
| Outer dimensions | φ43×70 |
|---|---|
| Case material | Case: ABS |
| Operating temperature range | -10～70℃ |
| Connection terminal type | R3/8 (PT3/8) female screw |
| Product mounting method | Pressure: Tighten the R3/8 (PT3/8) thread to a male screw |
Electrical Characteristics
| Rated voltage | Voltage output type: 9 to 13.2 VDC |
|---|---|
| Withstand voltage | 1800 VAC for 1 second |
| Insulation resistance | 500 VDC megohmmeter |
Characteristics Unique to This Product
- Output voltage 1 to 5 VDC, or output current 4 to 20 mA DC
- Pressure resistance: 3 MPa
- Load resistance Voltage output type: 5kΩ or higher Current output type: 200Ω or lower
- Current consumption Voltage output type: 18 mA or less Current output type: 40 mA or less
- Accuracy ±1.5% F.S or less (25°C) ±3% F.S or less (-10°C to 70°C)
- Impressed pressure 0 to 0.98 MPa
- Endurance: 2 million cycles
Inquiries about Control product
