KM-331

产品名称KM-331

Manual return version of KA-311
Protectors are returned manually

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout
Performs manual return by pushing the button
Product purpose

Prevent burnout of general-purpose three-phase motors
Intended use

Various industrial motors
Used at points where they must not be automatically returned
Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)
Compatible standard

None

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-HB, CTI 175 or higher)
Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed
Connection terminal type

Solder incurved terminal
FASTON tab terminal (#187, #250)
Product mounting method

Fixed in place with M4 screws or by other means
39.5-mm to 40-mm interval

Electrical Characteristics

Rated voltage

AC 250/500V
Rated capacity

Up to 1.0 kW
Contact withstand current

30/20A
Contact withstand count

200 times or more
Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less
Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 140°C
  • Set return temperature: 0°C or less
  • Temperature tolerance: ±10°C
  •  
KM-333

产品名称KM-333

Manual return version of KA-313
Protectors are returned manually

Basic Characteristics

Product summary

Detects overcurrent / locked rotor current and protects a motor from burnout
Performs manual return by pushing the button
Product purpose

Prevent burnout of general-purpose three-phase motors
Intended use

Various industrial motors
Used at points where they must not be automatically returned
Operating type

Bimetal type
(Convert a current applied to the product into heat in the internal heater, which then operates the bimetal and interrupts the circuit)
Compatible standard

None

Mechanical Characteristics

Case material

Phenolic resin
(UL 94, V-HB, CTI 175 or higher)
Operating temperature range

Temperature near motor: 20°C to 100°C
No freezing or condensation allowed
Connection terminal type

Solder incurved terminal
FASTON tab terminal (#250)
Product mounting method

Fixed in place with M4 screws or by other means
40-mm interval

Electrical Characteristics

Rated voltage

AC 250/500V
Rated capacity

Up to 2.2 kW
Contact withstand current

80/50A
Contact withstand count

200 times or more
Withstand voltage

1500 V for 1 minute
Leakage current: 10 mA or less
Insulation resistance

50 MΩ or higher with a 500-VDC megohmmeter

Characteristics Unique to This Product

  • Set operating temperature: 100°C to 140°C
  • Set return temperature: 0°C or less
  • Temperature tolerance: ±10°C
  •  

↑